CNG
CODEX ENGINEERING GmbH i SCHEIDT&BACHMANN TUBS d.o.o. agreed upon the joint appearance in the field of technology and manufacture of equipment for stations that supply vehicles running on CNG (compressed natural gas). In this way, the potential customers can be provided a complete service including design, manufacture of the equipment, installations and ready-for-use launching, even the supply with natural gas (gas supply on the territory of the Republic of Croatia only) of stations that provide CNG for personal and commercial vehicles.
The first results could be seen very soon and the first station for the supply of vehicles with CNG, owned by Geoplin-Energetika Ljubljana, Republic of Slovenia, was launched in 2011. Dozens of CNG and combined fuel dispensers with CNG have been manufactured and delivered to customers in EU member states and other countries.
CLOU 7000 CNG SERIES
Outlet pressure 200 bar on 15 C (temperature compensation)
Maximum flow 80 kg/min. or 150 kg/min.
Control for up to 3 compressed gas tanks
Remote control over GPRS or Internet, TUV SUD CE certificate
Counter: T-20 electronic counter with an integrated power supply unit or the T-30 counter of the newest generation Internal communication CAN-BUS
Power modules: L 3/2, L5/2
Communication: RS 485/V11, T02, IFSF-LON, FA litre impulses
Displays LED (back lighted LCD) 17 digits programmable displays
- 6 digits for total price
- 6 digits for the released quantity of fuel
- 5 digits for unit price
LPG-GPL autogas dispensers
Autogas dispensers are manufactured in the ZSM series in several versions, with one or two dispensing nozzles in one-side or two-side versions. Optionally, they can be equipped with lighted LCD displays and pre-set keyboards for pre-selection of amounts or dispensed gas quantities. The dispensers are equipped with flowmeters (flowmeter LPG) TATSUNO - Japan. Nominal flow 50l/min (60l/min, max.). The dispensers have all necessary certificates and operating permits.
Fuel dispensers for AdBlue
ZS AdBlue1 TM - Simplex dispenser with both side vehicle approach
ZS AdBlue 1/1 D TM - Simplex dispenser with one side vehicle approach (right)
ZS AdBlue 1/1L TM - Simplex dispenser with one side vehicle approach (left)
Special fuel dispensers for marinas
stainless steel (rostfrei) version,
with switches instead of micro-switches (for a higher-quality manipulation ashore and afloat)
up to two fuel types per each fuel dispenser,
with one or two nozzles
dispensing capacity: 45, 75 and 130 l/min
long hoses (up to 20 m) reeled up on special hose reels integrated in the fuel dispenser
with 1 - 4 LCD or LED displays
Combined fuel and autogas LPG-GPL dispensers
In 2006, the manufacture of combined fuel dispensers started, which dispense autogas in addition to various types of petrol and diesel. The dispensers are manufactured in a large number of types with up to 10 dispensing nozzles, and they are available in M and H versions. Dispensers are equipped with a hydraulic unit TATSUNO - Japan. Nominal flow 50l/min (60l/min, max.). The dispensers have all necessary certificates and operating permits.
MZ 7000 combined series
Maximum flow: 50 lit/min
Minimum flow: 5 lit/min
Nominal flow: 50 lit/min
Min. allowed measurement quantity: 5 lit
Basic measure volume: 500 cm3
Measurement chamber volume: 125 cm3
Measurable product: LPG
Operating conditions: -30 to +400C
Maximum operating pressure: 17 bar
Minimum operating pressure: 1 bar
Nominal diameter: DN25
Measurement error tolerance: +/-1%
MZ 7000 combined series
Technical characteristics for the LPG part:
Maximum flow: 50 lit/min
Minimum flow: 5 lit/min
Nominal flow: 50 lit/min
Min. allowed measurement quantity: 5 lit
Basic measure volume: 500 cm3
Measurement chamber volume: 125 cm3
Measurable product: LPG
Operating conditions: -30 to +400C
Maximum operating pressure: 17 bar
Minimum operating pressure: 1 bar
Nominal diameter: DN25
Measurement error tolerance: +/-1%
Technical characteristics OTHER FUELS:
Dispensing capacity: 45, 75, 130 l/min
Product: petrol, diesel
Operating conditions: -30 to +40 C
Measurement error tolerance: +/-0,25% (MID +/-0,5%)
Housing: Euro design
Hydraulics: monoblock MB80 for 45, 75 and 130l/min capacity, four-piston flowmeters with integrated pulse generator in 3 sizes according to dispensing capacity: KM 250 (45l/min.) KMO (75lit/min.) and KMI (130Lit./min.)
Dispensing hose and nozzles: Elaflex
Motor: el.motor 0,75 kw EExe II T1, T2, T3
Counter: T-30 electronic counter of the newest generation.
Internal communication CAN-BUS
Connection: RS 485/V11, T02, IFSF TCP/IP, IFSF-LON, FA litre impulse
Power modules: L3/2, L5/2 with remote motor control, el.-magnetic valves, signal lamps
Displays: LED (back lighted LCD) 17 digits programmable displays:
• 6 digits for total price
• 6 digits for the released quantity of fuel
• 5 digits for unit price
Nozzle holders (frontal panes) and the hydraulic housing cover are made of stainless steel with patterns
Versions: suction, pressure or combined systems (suction and pressure systems within the same hydraulic housing)
Optional:
TST Electronics Vareco plus operating electronic unit for the operation of active eco vapour recovery system with or without self-monitoring and self-regulation
Automatic temperature compensation
PRE-SET keyboard
Signal lamps (red or green)
Dispensing valves (dispensing nozzle) lock
The pressure version of fuel dispensers includes pressure input filters and KM flowmeter measuring groups. Pressure driven with Fe Petro submersible pumps or servo-controlled S&B monoblock technology in a separate housing. Fe Petro submersible pumps, IST – intelligent or STP – standard versions, together with additions constitute a reliable fuel supply system for complex situations, large petrol stations or petrol stations in marinas.
